Elastic Continuum Model
The elastic continuum model joins the continuum Newton’s law with the material stress-strain relation:
\begin{equation}
\rho \frac{\partial^2 u_i}{\partial t^2}=\frac{\partial T_{ij}}{\partial r_j}, \quad T_{ij}=c_{ijkl}\epsilon_{kl}
\end{equation}
where \(u_i\) is the local displacement, \(\rho\) is the density,
\(T_{ij}\) is the stress tensor,
\(c_{ijkl}\) is the stiffness tensor,
and \(\epsilon_{ijkl}\) is the strain tensor
\(\epsilon_{ij}=\frac{1}{2}\left( \partial_{r_j} u_i + \partial_{r_i} u_j\right)\).
In Voigt notation
\begin{equation}
T_{\alpha}=c_{\alpha \beta}\epsilon_\beta
\end{equation}
where \(\alpha, \beta\) run 1-6 and the Voigt tuples are related to the actual tensors by
\begin{align}
T_{1}=T_{xx}&,\quad
\epsilon_{1}=\epsilon_{xx}\\
T_{2}=T_{yy}&,\quad
\epsilon_{2}=\epsilon_{yy}\\
T_{3}=T_{zz}&,\quad
\epsilon_{3}=\epsilon_{zz}\\
T_{4}=T_{yz}&,\quad
\epsilon_{4}=2\epsilon_{yz}\\
T_{5}=T_{xz}&,\quad
\epsilon_{5}=2\epsilon_{xz}\\
T_{6}=T_{xy}&,\quad
\epsilon_{6}=2\epsilon_{xy}
\end{align}
Wurtzite
For a wurtzite crystal, the \(c_{\alpha \beta}\) can be written
\begin{equation}
c=\begin{pmatrix}
C_{11} & C_{12} & C_{13} & 0 & 0 & 0 \\
C_{12} & C_{22} & C_{13} & 0 & 0 & 0 \\
C_{13} & C_{13} & C_{33} & 0 & 0 & 0 \\
0 & 0 & 0 & C_{44} & 0 & 0 \\
0 & 0 & 0 & 0 & C_{44} & 0 \\
0 & 0 & 0 & 0 & 0 & \frac{1}{2}\left(C_{11}-C_{12} \right) \end{pmatrix}
\end{equation}
with in-plane wavevector \(q\), the strains are given by
\begin{align}
\epsilon_1&=iq u_x ,& \quad \epsilon_4&=\partial_z u_y \\
\epsilon_2&=0 ,& \quad \epsilon_5&=iqu_z+\partial_z u_x \\
\epsilon_3&=\partial_zu_z ,& \quad \epsilon_6&=iqu_y
\end{align}
Then the combined relation becomes
\begin{equation}
-\rho\omega^2\begin{pmatrix}
u_x\\
u_y\\
u_z
\end{pmatrix}=
\begin{pmatrix}
-C_{11}q^2u_x + iqC_{13}\partial_zu_z + \partial_zC_{44}iq u_z+\partial_zC_{44}\partial_zu_x \\
-\frac{1}{2}\left( C_{11}-C_{12} \right)q^2u_y +\partial_z C_{44}\partial_z u_y\\
-C_{44}q^2u_z+C_{44}iq\partial_z u_x+iq\partial_zC_{13}u_x+\partial_zC_{33}\partial_zu_z
\end{pmatrix}
\end{equation}
Or
\begin{equation}
\rho\omega^2u=
Cu, \quad C= q^2C^0 -iq C^L\partial_z -iq \partial_z C^R - \partial_z C^2 \partial_z
\label{eq:split}
\end{equation}
where
\begin{equation}
C^0= \begin{pmatrix}
C_{11} & & \\
& \frac{1}{2}\left( C_{11}-C_{12} \right) & \\
& & C_{44}
\end{pmatrix}, \quad
C^2= \begin{pmatrix}
C_{44} & & \\
& C_{44} & \\
& & C_{33}
\end{pmatrix}
\end{equation}
\begin{equation}
C^L= \begin{pmatrix}
& & C_{13}\\
& 0& \\
C_{44} & &
\end{pmatrix}, \quad
C^R= \begin{pmatrix}
& & C_{44}\\
& 0& \\
C_{13} & &
\end{pmatrix}
\end{equation}
Wurtzite piezoelectric potential
Once the acoustic phonon modes are solved for, each mode can be considered a source of piezoelectric charge
\begin{align}
\rho=-\nabla \cdot \vec P&= -\nabla \cdot \left[
\begin{pmatrix}
0 & 0 & 0 & 0 & e_{15} & 0\\
0 & 0 & 0 & e_{15} & 0 & 0\\
e_{31} & e_{31} & e_{33} & 0 & 0 & 0
\end{pmatrix}
\begin{pmatrix}
\epsilon_{xx}\\
\epsilon_{yy}\\
\epsilon_{zz}\\
2\epsilon_{yz}\\
2\epsilon_{xz}\\
2\epsilon_{xy}
\end{pmatrix} \right]
\end{align}
where \(e_{\alpha\beta}\) are the piezoelastic moduli
\begin{equation}
q^2\varepsilon_\perp\phi -\partial_z\varepsilon_\parallel \partial_z \phi
=q^2e_{15}u_z-iqe_{15}\partial_zu_L
-iq \partial_z e_{31}u_L- \partial_ze_{33}\partial_zu_z
\end{equation}
which can be written
\begin{equation}
C^0\phi -\partial_z C^2\partial_z\phi = C^{0'}u_z-iC^{L'}u_x-iC^{R'}u_x-\partial_zC^{2'}\partial_zu_z
\end{equation}
where
\begin{equation}
C_0=q^2\varepsilon_\perp, \quad C_2=\varepsilon_\parallel
\end{equation}
\begin{equation}
C^{0'}=q^2e_{15},
C^{L'}=qe_{15},
C^{R'}=qe_{31},
C^{2'}=e_{33}
\end{equation}